Continental Rupture Disc
ENVIRO-SEAL RUPTURE DISC
Nominal Size Range: 1″ – 36″ (25 mm – 900 mm)
Burst Pressure Range: 1 psig – 59 psig (0,069 barg – 4,07 barg)
Maximum Recommended Operating Ratio: 50% of the rupture disc’s rated (stamped) burst pressure
Seating Configuration: Flat seat
Service: Liquid or gas
BDI Alarm System Compatible?: Yes
ASME Code Symbol Stamp Available?: Yes
Constructed for your application
The ENVIRO-SEAL is composed of a metallic top section and a non-metallic seal. Depending on which design you need, the seal could be on the process side, on both the process and the vent side or between two metallic top sections.
The top section of the ENVIRO-SEAL is designed with our seven-hole pattern to prevent fragmentation. As a standard, the ENVIRO-SEAL is manufactured from 316 stainless steel, fluoropolymer seals and a non-asbestos gasket on both sides of the rupture disc. Standard sizes range from 1″(25mm) through 36″(900mm).
ENVIRO-SEAL rupture discs are available in three designs:
- Type I – Bursts in one direction only
- Type II and III – Bursts in either direction, positive or vacuum, at the same burst pressure
